How to setup a tripod and a camera

• Spread the tripod legs
• Adjust the length of the tripod legs by opening the tensioners on the legs to desired height,there are two tensioners on each leg.
•  Adjust the pan/tilt to desired angle,
• Loosen the screw underneath the tripod head to adjust the tripod head where the camera is placed.Once you have adjusted the tripod head,screw the screw back into place tightly so it stays at this height.
• You will need a shoe mount to connect your camera to your tripod.The shoe mount belongs on top of the tripod head and another shoe mount connects to the bottom of the camera.These two shoe mounts screw together when the two shoe mounts are connected.Position and screw the plates to your desired position
• Adjust your pan and tilt positions if needed and use pan and tilt locks if needed.
• Turn camera on and check the framing and height,adjust if needed.